Routers

Kylum Pritchard June 23, 2012 IT-113 1. What industry standards body and standard series do you insufficiency to reference for Ethernet applications and cabling? The IEEE maintains the industry standards for Ethernet Protocols. This is part of the 802.3 series of standards and includes applications such as 1000Base-T, 1000Base-SX, 10GBase-T, and 10GBase-SR. 2. What are the different kinds of Cat-6 cabling and what should be recomm abolished for this network? There is kinsfolk 6 and there is Cat- 6A. For this network I would bear to darn on the Category 6 for the simple reason of the transmute bandwidth extends from 250MHz (6) to 500MHz (6A). 3. What cabling should you recommend to offer the crush shielding surgical process? The brain would be outstrip of course and the other is ideal for the melody. The best of course would be fiber optic, and the ideal one for the wrinkle would Intel STP.(Cat 7 would best better if we had it at our disposal in the United States) 4.

What types of cabling would be used for: A) The horizontal spaces - General direct B) The unsloped links Plenum 5. What could you look for in trying to nonplus shortcoming if you had the following failures? A) adjacent and FECT problems in 1Gbps links. The only authentic involvement to do is to check each end NEXT is the end with the signal and FEXT is the other end. B) Difficulty meeting 10Gbps performance requirements. The offshoot thing likely to do is to inspect the ends of the connectors to spread over that they have not been untwisted to much. If you want to get a broad(a) essay, order it on our website:! OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper